Site
This view shows you the entire project, the site, including all buildings and objects.
You can change the designation of the site, the appropriate utilisation profile, maintenance factors and the site orientation here.
Building
Focuses the selected view on the selected building.
If you have more than one building, you can select the desired building via the drop-down menu.
As soon as you have drawn more than one building, the menu is displayed.
They are numbered according to the order in which they were drawn.
Storey
Focuses the selected view on the selected storey.
If you have drawn more than one storey, you can select the desired storey using the drop-down menu.
As soon as you have drawn more than one storey, the menu is displayed.
They are numbered according to the order in which they were drawn.
Room
Focuses the selected view on the selected room.
If there are several rooms, you can select the desired room via the drop-down menu.
The menu is displayed as soon as you have drawn more than one room.
They are numbered according to the order in which they were drawn.
01) Display plans
02) 3D Rendering
03) Floorplan view
04) Front view
05) Side view from the right
06) View from behind
07) Side view from the left
08) Zoom to entire scene
09) Tape measure
10) Set coordinate system
Display plans
With this function you can either load plans into the project or display or hide already imported plans.
3D Rendering
Here you can display your project in 3D.
You can also edit objects in this view if you are in the corresponding tool.
This means that to change the building contour, for example, you must be in the storey and building construction tool.
Floorplan view
The floor plan view shows you the top view of the object you have selected (e.g. room 1).
Front view, Side view from the right, View from behind, Side view from the left
These views are hidden by default and can be switched on if required.
Zoom to entire scene
Zooms in or out of the selected view so that all objects are displayed full screen.
Tape measure
With the help of the tape measure you can measure in the drawing at any time and have the measurement displayed.
Set coordinate system
With this function you can set a new coordinate system in your project.